Aluminum Frame Tempered Glass Sliding Window

1. Aluminum doors and windows in use, the action should be light, push and pull go with the flow; if you find it difficult, do not hard pull hard push, should first troubleshoot. Ash accumulation, deformation is the main reason for the difficulty in pushing out new doors and windows of aluminum alloys, to keep the door frame clean, especially the cleaning of the sliding groove. A vacuum cleaner can be used to remove the ash from the inside of the tank and the door.

 2. When cleaning aluminum alloy doors and windows, people should not step on the aluminum frame, and do not hold the frame for support. 

3. Aluminum doors and windows can be cleaned with water or neutral detergent with a soft cloth. Do not use ordinary soap and washing powder, and do not use strong acid and alkali detergents such as decontamination powder and toilet cleaner.

4. After the rainy day, the wet glass and door and window frame should be wiped out in time, paying special attention to drying the chute. The chute is used for a long time, the friction is increased, and a little oil or a layer of fire wax oil can be added. 

5. Always check the joints of the aluminum  frame wall. If it is loose for a long time, it will easily deform the whole frame, so that the doors and windows cannot be closed and sealed. Therefore, the loose screw at the joint should be tightened immediately. If the base of the screw is loose, apply a small amount of cement to seal with a strong epoxy glue.